top of page

Woodburners & Fireplace Alterations

A J Curnick & Sons Builders are HETAS registered engineer and are capable of installing new and customers own wood burners to HETAS /Manufacture standards. We can improve old fireplaces or even build new to customers preferences according to building regulations.

On this job the customer wanted to keep their stone fireplace and hearth but wanted to change from a open fire to a Charnwood C5 Woodburner. We install a 316 stainless steel flexflue down the chimney with insulation. We also rendered the inside as the original brickwork was not in a nice cosmetic state.

On this job the customer wanted an old open fireplace to be made into a through fireplace to connect lounge and kitchen with heat from a Double Sided Woodburner. We constructed and reinforced the walls to allow for the fire, then installed a new hearth with rendered sides. A 316 stainless steel flexflue with insulation was put in place down the chimney. We also plastered the chimney breasts on both sides ready for them to paint.


This was a new installation.

On this job the customer wanted a new brick fireplace with Suffolk white floor brick hearth to go with the old style farm cottage.

Before and after job 3.1.1.jpg

On this job the customer wanted to change from the brick fireplace to a simple plastered look with a nice stone hearth.

We also installed a wood burner with 316 stainless steel flexflue liner and insulation. The inside was rendered and the sides plastered ready for the customer to paint.

bottom of page